OpenInsight 10 Features

The SCALEFACTOR property

AddThis Social Bookmark Button

As we mentioned in our last post on High-DPI, the work needed to accommodate per-monitor DPI scaling in Windows 8.1 has also created the ability to scale OpenInsight forms to an arbitrary value outside of any system DPI settings.  This new functionality is exposed via theSCALEFACTOR property described below.

SCALEFACTOR property

This WINDOW property is a dynamic array comprising four fields:

<1> ScaleFactor
<2> Minimum ScaleFactor
<3> Maximum ScaleFactor
<4> ScaleFactor Increment

<1> ScaleFactor

This is a number that specifies how much to scale the form by.  A value of 1 means that the form has no scaling applied, a value of 1.5 scales the form to one-and-a-half times its normal size and so on.

Note that the scale factor is applied after any scaling applied for system DPI.  So, if your form runs on a 144 DPI monitor (150%) and has a scalefactor of 2 applied the actual scalefactor used is 3.0 (1.5 x 2.0).

<2> Minimum ScaleFactor

This specifies the minimum value that the ScaleFactor can be set to. By default it is set to “0.1”.  This value can be set at design time. See the note on “Scaling Restrictions” below.

<3> Maximum ScaleFactor

This specifies the maximum value that the ScaleFactor can be set to. By default it is set to “5.0”.  This value can be set at design time. See the note on “Scaling Restrictions” below.

<4> ScaleFactor Increment

If this field is set to a value other than 0 it allows the ScaleFactor to be adjusted via the  Mouse-wheel /Ctrl-key combination, or with a “pinch-zoom” gesture if running under a touch screen.  The increment value controls the rate at which the form grows or shrinks.  This value can be set at design time.

Example 1: Set a form’s scale to twice its designed size while allowing the user to adjust the scalefactor by the mouse or touchscreen:

* // Note that we ignore the min and max scalefactors, leaving them at their
* // defaults.
scaleFactor = ""
scaleFactor<1> = 2    ; * // twice normal size
scaleFactor<4> = 0.1  ; * // allow mousewheel/gesture - each wheel notch
                      ; * // adjusts the scalefactor by 0.1

Example 2: Comparing OpenInsight forms with a SCALEFACTOR of 0.5 and 1.0 respectively (both running on a 144 DPI desktop with DPISCALING disabled)

Comparing SCALEFACTOR 0.5 vs 1.0

Comparing SCALEFACTOR 0.5 vs 1.0

Example 3: Comparing OpenInsight forms with a SCALEFACTOR of 1.0 and 1.7 respectively (both running on a 144 DPI desktop with DPISCALING disabled)

Comparing SCALEFACTOR 1.0 vs 1.7

Comparing SCALEFACTOR 1.0 vs 1.7

DPI Image Lists and Image Scaling

In Example 3 above note the quality of the magnifying glass glyph on the buttons in the scaled form: it is much clearer and sharper on the Search button than it is on the Split button. This is because the Search button was designed using a “DPI Image List”, which means that an array of images, along with a corresponding array of DPI values, was specified for this glyph rather than just a single image. OpenInsight scans this DPI Image List looking for the closest match it can find when performing a scaling operation.  By contrast the Split button is using a single image designed for 96 DPI and stretched to fit, resulting in a blurry appearance.

(Note: We first mentioned this functionality in the section “Supporting images under High-DPI” in ouroriginal High-DPI post).

Or course, you may also find yourself in the position of not wanting a particular image scaled, and in this case we’ve added a new property to the Image API called IMAGEAUTOSCALE.  This is a simple boolean property that controls if an image is scaled by the system during the scaling process.  It’s default value is TRUE.

(We’ve also added a similar property to other areas of the system that use images as well, so there is a GLYPHAUTOSCALE property, a SPLITGLYPHAUTOSCALE property and so on).

 

Scaling Restrictions

The minimum and maximum size that a form can be rescaled to can be restricted by the minimum and maximum window sizes as defined by the OS.  As a general rule this size is usually slightly larger than the size of the entire desktop across all monitors (See theGetSystemMetrics() Windows API function along with the indexes SM_CXMAXTRACK, SM_CXMINTRACK, SM_CYMAXTRACK, and SM_CYMINTRACK for more details).

You can, however, override this behaviour if you set the TRACKINGSIZE property for a form, specifying values large enough to handle your desired scaling range.

 * // Example - Ensure the form will actually scale to the min and max factors
 * //           we've set
 
 winSize     = get_Property( @window, "SIZE" )
 scaleFactor = get_Property( @window, "SCALEFACTOR" )
 
 trackingSize    = ""
 trackingSize<1> = winSize<3> * scaleFactor<2>
 trackingSize<2> = winSize<4> * scaleFactor<2>
 trackingSize<3> = winSize<3> * scaleFactor<3>
 trackingSize<4> = winSize<4> * scaleFactor<3>
 
 call set_Property( @window, "TRACKINGSIZE", trackingSize )

 

Scaling Interaction

In our next post we’ll take a look at the new SCALED event and discuss how to interact with the system during a scaling operation.

(Disclaimer: This article is based on preliminary information and may be subject to change in the final release version of OpenInsight 10).

Revelation Conference

The previous Revelation Software Users' Conference was held at the Omni Orlando Resort at Championsgate in Orlando, Florida on April 18-21, 2016.

Click Here

On The Road

Throughout the year Revelation Software attends various multivalue User Conferences as well as our Regional User Group meetings.

Click Here

International Offices

Revelation Software has various International Offices and sales regions located on multiple continents.

Click Here

Featured Clients

Revelation Software's clients are involved in every industry around the world. Here is a sampling of some of our clients and their businesses

Click Here